Reverse -0.5° Angle Spacer for Tapered Fork

The geometry of the bike can be fine-tuned with the tapered angle spacer

(fork cone). It is possible to make the steering angle half a degree (-0.5°) flatter, which means even more performance can be achieved on steep and difficult descents!
The spacer replaces the conventional tapered fork cone and is mounted between the fork crown and the headset.
The angle spacer can be used with any headset with 45° ball bearings. (45° ball bearings are installed in 95% of all bikes)
ATTENTION: Cannot be used with IS (fully integrated) headset!!

To use the Angle Spacer, simply remove the fork from the frame and then remove the existing crown race from the fork crown.
The Angle Spacer is mounted/slammed on directly above the fork crown in the place where the old crown race was previously.

Using the Angle Spacer does not change the stability and stiffness of the fork in any way. It can be mounted on any bike without any problems.
This gives you a more modern geometry with more riding fun and safety.

Features
- Installation height: 10 mm
- Weight: 19 g (+/- 5 % weight tolerance)
- Outer diameter Ø: 51.0mm
- Material: Aluminum