Cleaning | Washer

Pro-Green MX - Cycle-Wash / After-Shine 101 - Bike Cleaner

Pro-Green MX - Cycle-Wash / After-Shine 101 - Bike Cleaner

£4.99
You will earn 4 loyalty points with this purchase

Pro-Green Cycle Wash is a professional hi-performance mountain bike cleaner. Incorporating a special blend of biodegradable surfactants designed to clean every part of your Bike leaving behind a streak free, shiny finish. Pro-Green Cycle Wash provides a powerful, penetrating action which releases the correct level of active cleaning agents to ensure perfect results each time for mud covered bikes.

Why use it?

Pro-Green Cycle Wash. Fully biodegradable salt free formulation. Does not attack aluminium, carbon fibre or any other sensitive parts or panels on your bike.

Removes Mud, Dirt, Grime, Clay, Sand (including Clay and Sand staining from plastic parts) with minimum of effort. No other cleaner removes sand and clay stains from plastic parts like Pro-Green Cycle Wash does. Rejuvenates your kit from the first wash, removing Mud, Dirt, Grime, Clay, Sand etc.

HOW TO USE

Pro-Green Cycle Wash. Is quick and easy to use simply apply product to bike, use a brush to agitate if preferred or allow the product to penetrate for 5-10 minutes before rinsing off, dirt, grime and mud simply melts away.

Bike Cleaning Instructions:

Remove excess mud, clay, sand etc from your bike first using your pressure washer, place your bike on bike stand and apply Pro-Green Cycle Wash to your bike. Allow the product to penetrate for 5 minutes before rinsing off. A streak free shiny finish will be visible after use.

Kit Cleaning Instructions:

Add 300ml of concentrated product to a bucket of warm water and submerge your kit inside. You can also throw in your goggles, straps and white trainers before leaving to soak overnight. The following morning, remove your goggles and straps and rinse under a tap until all chemical excess has been removed then leave to air dry. With trousers place these on the floor and agitate the bottom area with sweeping brush to loosen excess dirt before place directly into your washing machine with kit top. Wash your kit at 30 degrees on a normal wash or sports wash. At the end of the wash cycle your kit will be the cleanest you have seen it since the day you purchased it.

Pro-GreenCycle Wash Contains No Harmful Ingredients: No Caustics, No Solvents, Non Alkaline.

Dilution Instructions

(When using the 5Ltr Concentrate)

Heavy Duty Cleaning - 1 Part product - 1 part water
Normal Cleaning - 1 Part product - 2 parts water
Light Cleaning - 1 Part product - 3 parts water
Kit Cleaning - 300ml Product to bucket of warm water and soak overnight

Pro-Green Cycle Wash Contains No Harmful Ingredients: No Caustics, No Solvents, Non Alkaline

--------------------------------------------

AMAZING HIGH GLOSS SHINE

A viscous liquid incorporating a specially chosen blend of emulsion silicones and waxes designed to leave your plastic and metal parts looking like new with a high gloss protective finish after each application. After-shine101 has a self levelling formulation leaving an even coat of shine after each application as it dries without leaving a sticky or greasy residue.

After-shine101Specially formulated for use on plastic, metals, aluminium, carbon fibre, titanium etc, leaving a protective film against moisture on metal components and exhausts.

Why use it?

A fantastic high gloss even shine with no sticky or greasy residue.

Directions for Use

Clean your bike first with pro-green bike wash and while your bike is still wet, apply after-shine101 directly to bike surface avoiding brakes, seat and handle bar grips cover the whole bike and leave to air dry for about 30 minutes, when dry an even layer of high gloss shine will be visible.

After-shine101 can be used on your machine whether it is wet or dry apply and leave to air dry for an even high gloss shine.

Do Not Spray Seats, Brakes, Tyres and Grips.

Own this product? Write a review.
Brand Pro-Green MX