Fatbikes are great fun to ride, however the amount of mud and spray they throw up off those fat tyres isn't. Designed for tyres up to 5 inches wide to keep the muck out of your face and eyes, whilst still following the tried and tested tyre hugging Mudhugger design.
Designed to fit most Bluto and rigid fatbike forks/tyre combo's. Basic rule of thumb for Bluto forks is, if you have 10mm clearance between the top of the tyre and the underside of the fork brace you can fit a FatHugger. The same tyre on a different wheel can make a massive difference to the available clearance, so please check before ordering.
For rigid forks, just ignore the holes for the forkbrace and ziptie to the forklegs using the holes on the Hugger legs only. You can choose to fit it as close or as far away from the tyre as you like.
Please note: Some rigid forks taper differently and may not be suitable, please measure the internal width at the tyre prior to ordering. Comes covered with clear protective tape which is intended to be removed prior to bike installation.
Weight: Approx 160g, excluding zipties and helitape
Size: 130mm (5 1/8 inch) wide x 510mm long approx, includes zip ties and helitape.