Developed with the help of Sam Pilgrim we have taken the best-selling DJD BD hub and improved it further by adding the proven 120 teeth triple wedge pawl mechanism of the Supa Drive hub. This provides positive and secure drive, a freewheel sound like no other and micro-notch engagement gaps for that perfect pedal pick-up.
BD hubs have been utilised successfully in the hardcore BMX market for quite a while, and the advantages of their lighter weight and improved durability over cartridge bearings are pretty well proven, especially when using compact cog sizes.
The stresses caused in a Single Speed hub can be huge and, a bush spreads the loads involved over a much larger surface area than ball bearings can achieve, and therefore helps to avoid premature bearing failure.
In addition to the BD features, we have fitted a lightweight alloy axle with tough, replaceable, M10 "Bolt-in" Cr-Mo fixings and alloy caps.
We also know that bolt-in fittings can be tricky if the axle starts to spin when turning the bolt, (as you have nothing to hold) - so we have also added a 6mm Hex broach deep inside the axle - just in case the axle starts to spin when you don't want it to !
14mm adaptors included: the large surface faces of the "cones" allow us to also use 10-14mm adaptor washers - making this hub suitable for 10mm or 14mm dropouts.
Forged & CNC finished body with slotted flanges.
Bush Driver with screw-on 11T cog.
Hollow Alloy axle with 6mm central hex.
Cr-Mo M10 Bolt-in fixings.
14mm adaptors included.
Super strong lightweight alloy axle.
2 sealed main body bearings and 1 hardened plastic driver bush.
3 wedge pawls ensure positive drive.
120 points of engagement.
Lightweight forged CNC finished alloy hub shell.
11T x 1/8" drivers cog fitted standard.
(9,10,11,13,14,16t cogs also available).
Flange Diameter: 58mm
Center Left: 34mm
Center Right: 35mm
32H Black or Red.
36H Black or Red.