Updated for 2020, the MK3 FatHugger is same tried and tested shape apart from the reworked front edge, which is now cut straight.
Please note MK3 FatHuggers come with a very thin clear plastic protective film which should be removed before installing on you bike.
Fatbikes are great fun to ride, however the amount of mud and spray they throw up off those fat tyres isn't. Designed for tyres up to 5 inches wide to keep the muck out of your face and eyes, whilst still following the tried and tested tyre hugging Mudhugger design.
Designed to fit most Bluto and rigid fatbike forks/tyre combo's. Basic rule of thumb for Bluto forks is, if you have 10mm clearance between the top of the tyre and the underside of the fork brace you can fit a FatHugger. The same tyre on a different wheel can make a massive difference to the available clearance, so please check before ordering if not sure.
For rigid forks or Manitou Mastadon (or similar), just ignore the holes for the forkbrace and ziptie to the forklegs using the holes on the Hugger legs only. You can choose to fit it as close or as far away from the tyre as you like.
Designed and made in the UK.
Please note: Some rigid forks taper differently and may not be suitable, please measure the internal width at the tyre prior to ordering.
Weight: Approx 160g, excluding zipties and helitape
Size: Made from 3mm thick polypropylene - 130mm (5 1/8 inch) wide x 510mm long approx, includes zip ties and helitape.