Hope/HED Big Deal (Slam69Built) wheelset

Stock Status: In Stock
£1,700.70
You Will Earn 1700 points with this purchase

PRODUCT DESCRIPTION

HED Rim on Hope Fatsno hubs.
 

Hed's entire line of Big Deal fat rims can now be purchased as a rim-only, for the custom build of your dreams. 

Big Deal is 445 grams and 85mm-wide of pure fat-bike joy.  This one-piece, full-carbon rim will change the way you ride. Big Deal utilizes a ribbed, single-wall design to maximize stiffness and minimize rotational weight…all on a tubeless-ready platform.  Compared to most aluminum fat bike wheel/tire combinations in the market today, you can expect to lose 1.5 to 2 pounds… per wheel.  Note that the Big Deal is drilled symmetrically ONLY and cannot accommodate offset frames.
 
Big Deal utilizes Inflatobam, Hed’s patent pending tubeless system for installing big tires.  The twin channel rim design provides a better pre-inflation seal by trapping each tire bead against the rim.  This drastically reduces the amount of air it takes to get the beads to “bam” into place.  In conjunction with the rim shape, Inflatobam utilizes Inflatobands.  These effectively provide a variable rim-channel diameter. This compensates for the discrepancies in tire bead diameters by minimizing the gap between the tire and the rim channels (the main source of air leaks).  Once seated, the angled bead shelf prevents the tire from collapsing back into the rim at low pressure.  Our interior surfacing and tight tolerances ensure no tire burp or slip.  Also note that our rim shape does not require tire levers to remove and install tires.  Inner tubes may be used, too.

Tech Notes

1. Do NOT use tire levers on Big Deal rims!

2. For all types of bicycle wheels, a hard strike on the rim is likely to result in rim damage. At the point of impact, an aluminum rim will dent, and a carbon rim may delaminate. With any such damage to a Hed wheel, our lifetime crash replacement policy enables the original owner to repair or replace the wheel at substantial savings.

-----------------
Hope Fatsno hubs are sorted and the benchmark for quality these days. 

We use DT Supercomp Spokes to build along with HEDs nipples and valve washers.

We list the hubs as 150 or 135 front and 177 or 197 rear. Please bare in mind all hubs can be adapted to suit.

PRODUCT INFORMATION

CUSTOMER REVIEWS

Write an online review and share your thoughts with other shoppers!
Be the first to review this product